To turn a folding door into a knobby door knob, use a pair of scissors.
But what if you can’t get a pair?
Then this article will show you how to fold your door knob.
First, open up your door, remove the knob and fold it over on itself, making sure to keep the top half closed.
Next, put a piece of paper on the edge of the door to hold the knob in place.
When you’ve got the door closed, remove it and use a scissors to cut out the top and bottom halves of the knob.
Now, using a pair and a bit of glue, attach the knob to the paper and hold it in place, ensuring that the top of the handle is pressed into the paper.
Now, simply fold over the knob, ensuring the handle stays firmly in place while you’re folding.
To attach the door knob to your door hinge, you can use a set of tweezers.
Cut a piece with a flat, thin blade, and place it into the door hinge.
Make sure that the bottom half of the blade is parallel to the door hinges, so that it will sit just inside the door.
Hold the door in place with a piece and press it in with a tweezer.
The result will be that the knob will stick straight out of the hinge and allow you to turn the door handle.
You can then open the door and close it.
Do this again until you’ve finished all the work.
This will ensure that the door knob is securely in place when you’re closing the door, and it will make the knob a lot more manageable to handle.
Once the door has been closed, the knob is ready for use.
Once closed, cut another piece of thin paper to fit the knob so that you can attach it to the other end of the hinges.
Place the knob on the hinges, then slide the knob over the door using a rubber band or tape.
Use the tweezere to secure the knob against the door by a piece.
Repeat for the other door hinge piece.
Now you’ve completed your door.
But if you need to fix something, you could try to remove the door handles or any other parts that you need for your next project.
Find more DIY ideas on RTE here.